How Does a Locksmith Cut a Key After Rekeying a Cylinder?
If you're wondering how a locksmith cuts a new key after rekeying a cylinder, then read on. The process involves using a Dremel device to cut the key's grooves. A locksmith has the proper equipment and knowledge to successfully complete this task. In this article, we'll look at the steps involved in changing or renewing a cylinder.
Using a Dremel device to cut in the key's grooves
To rekey a cylinder, locksmiths often use rotary tools to cut small pieces of material out of the lock. While the generic term "rotary tool" may not convey the exact purpose, it is ideal for small spaces. In addition to being adaptable, these devices have various heads that allow locksmiths to cut into any shape and size.
Changing or rekeying a cylinder
There are several reasons why changing or rekeying a cylinder is necessary. You'll want to ensure that you're using a high-quality lock, which can take a while. You'll need specialized tools to disassemble the lock, but rekeying a lock is not a difficult DIY job. Here's what you need to know.
Changing a lock cylinder is not difficult. It simply involves changing the pins and springs within the lock cylinder. When these parts get worn out, your lock won't work, and any key will be useless. By rekeying a lock, you'll ensure that only one set of keys will work in the lock. This process is best done every five to seven years, and after a break-in.
You'll need a tool to remove the cylinder's plug. Depending on the type of lock you have, rekeying a lock requires replacing the pins and springs. A rekeying kit contains different sized pins and a variety of tools to perform the task. First, you'll need to remove the knob. This is where you'll insert the new key. Be sure to match the new colored pins to the lock's color code. Afterward, you'll need to replace the retainer ring.
If the original lock cannot be fixed, rekeying a lock is a viable option. It is a much cheaper alternative than replacing the entire lock. Rekeying a lock is also possible with existing keys, so you'll be able to use the same keys as you did before. And it's possible to use the same key for all of the locks in your home.
Rekeying a lock without the original key
When you have a rekeying cylinder, the locksmith has to completely disassemble the lock. This is because the pins in the lock are different heights, and the new key must have grooves that match. A homeowner who wants to use the same key for all locks will find this procedure convenient. It will save them from cluttering their key ring and from having to spend time searching for their keys.
A rekey kit should contain various tools for locking and unlocking the locks. The rekeying kit should also include different-sized pins. To remove a knob, use a separater tool to separate it from the shank. After removing the knob, push the cylinder from the front to the back. If it has a back cap, remove it with the right tool.
When the rekeying cylinder is complete, the lock plug is replaced. Then, the locksmith uses a tweezers to separate the upper and lower lock pins. After the new pins have been replaced, the new key is used to partially guide the new pins into place. This process can take a couple of hours to complete. The homeowner may also try it by themselves to get a better idea of what is involved.