How Does a Locksmith Open a Locked Door?

how does a locksmith open a locked door

If you are stuck in a situation where you have locked yourself out of your home, you may be wondering how a locksmith opens a locked door. If so, you may think that they use a screwdriver to open a four-pin lock, or a tension pick set. However, this is not the case. This article will teach you how to unlock a four-pin lock and prevent the need for a locksmith in the future.

Using a tension pick set

Using a tension pick set to open an inside door is a simple and effective technique for opening locked doors. The key to successful lock picking is to maintain tension on the pick. A tension wrench can be found in most hardware stores. Simply insert it into the keyhole and apply light pressure in the direction of the key. Hold the tension wrench as you go through the rest of the process. Using too much or too little pressure will prevent you from picking the lock, so you'll need to use light pressure. It may take a few attempts to succeed.

Using a bump key

If you want to unlock a locked door, you can try to use a bump key. This special key, also known as a magic key, can lift the upper pins from the tumbler. Depending on the lock, it can take several tries to unlock the door. It can also damage less expensive locks. However, with a little practice, you can unlock the door in minutes.

Using a screwdriver

One of the most common tools for unlocking a locked door is a screwdriver. You probably have one of these lying around your house. To use a screwdriver to unlock a door, insert the screwdriver into the small gap between the door frame and the door. Turn it clockwise until you hear a click. Repeat this process as many times as necessary until you hear the locking mechanism turn.

Using a tension pick set to open a four-pin lock

In this article, you'll learn how to use a tension pick set to open a lock with a check pin. These locks are relatively easy to pick, but they can be challenging to beginners. In this article, I'll explain the differences between the two types of lockpicks, and show you how to pick these kinds of locks using a tension pick set. Depending on your skills, you may also want to look into Single Pin Picking, which is an advanced technique.

Using a screwdriver to open a two-pin lock

When you lock your door and realize that you don't have the key, you may think about trying to unlock it with a screwdriver. In some cases, a bobby pin may work as a lock pick. Another way to unlock a door is to use a screwdriver to pry out the pin. When doing this, make sure to use more pressure and force than normal.

Using a wedge to open a two-pin lock

If you have a two-pin lock on your door, then the most effective way to open it is to use a wedge. Wedges are commonly available for locks. The best way to use them is to lift the top pin from below the shear line, while applying torque to lift the bottom pin. This method will allow you to turn the lock's plug and open it. If you're not successful, you can reset the lock to prevent any damage to your lock.

Using a screwdriver to open a four-pin lock

There are a few steps you should take to pick a four-pin lock. The first step is to insert the screwdriver into the lock's keyhole. Apply light turning force to it. Next, insert the rake tool, which should be positioned above the screwdriver. The rake helps to clean the pins, so be sure to apply light pressure to it as well. Finally, reverse the process to reassemble the lock.