How to Open Door Locks Where a Locksmith Cant Open It

door locks where locksmith cant open

If you need to open a door that a locksmith cannot open, there are a few things you can do yourself. You can try to drill a door lock, use a hex wrench, or a card to get through. If you fail to unlock the door this way, you may need to call a locksmith. If all else fails, you can always try one of these DIY solutions. Read on to find out how to open a door lock without a locksmith!

Unpickable locks

An unpickable door lock is one of the most common types of lock, and there are some common types of lock that a locksmith will not be unable to open. Professional locksmiths have special tools to raise the teeth of the lock and open the bolt. They will also provide you with advice on future lock issues. However, if you can't open the lock on your own, you should call a locksmith to help you.

Broken keys are another common cause for a broken key to be stuck in a lock. This makes it more difficult to get it out. However, with the use of needle nose pliers, you can usually get the key out without damaging the lock. If a broken key is the main cause for the lock sticking, lubrication will usually solve the issue. If all of these methods fail, call a locksmith who will give you the right tools to open your door.

Drilling a door lock

Drilling a door lock where a locksmith cannot open it is an alternative to having a door open while you are stuck inside. Drilling the lock requires a steady pressure and a low setting to ensure you do not cause any damage to the lock. A 1/4-inch bit will work well, as it will break the pins inside the lock. The screwdriver will turn the lock the same way as a key does.

If the lock is difficult to open, a flat-head screwdriver will do the trick. Start by inserting the screwdriver into the lock. Make sure to turn the screwdriver in the direction of the key. Using a larger drill bit could damage the lock mechanism. A lock drilling template is available at hardware stores. Once the drill is placed in the correct position, use a center punch to make sure you have the correct depth.

Using a hex wrench

Locked doors are a major inconvenience, especially if you can't get to them quickly. Fortunately, there are a few methods you can use to open them yourself. You can try a hex wrench by inserting it into the handle hole, turning it to unlock the door. It should fit tightly without jamming, but it should feel like you're hitting something when you turn it. Alternatively, you can try a hinge to open the door. While it's not as effective, you don't have to break the door or the lock to unlock it.

In some cases, a hex wrench can open door locks that a locksmith cannot open. You'll need the correct size wrench to fit the lock. Make sure it fits snugly, but not so tight that it requires forceful entry. When you're done, jiggle the wrench from side to side, and you should be able to turn the lock open. This method is a fast and effective way to unlock locks. Keep in mind that it works only with certain kinds of locks.

Using a card

A basic skill to learn in case of emergency is how to open a lock using a card. However, this technique won't work on deadbolt locks or slanted latches. Moreover, you have to know the type of door locks in your house and whether they're strong enough to prevent burglars. Luckily, you don't need to spend money on buying expensive tools or hiring a locksmith to open the lock.

A credit card will work as a key in door locks. You can try to use it for the same purpose as a locksmith. To open a door, you just have to slide a credit card against it. Make sure that the card is slightly tilted. Afterwards, you can push or pull the door while wiggling the card. A thicker card may be required in order to open a door.

Using a bobby pin

If you can't get a locksmith to open your door, there are other solutions that you can try. One of these is to use a bobby pin. A bobby pin is simply a bent pin that can be inserted into a lock. To use it, you need to put the flat end into the lock and then fold the tip of the pin so that it rests flush with the doorknob. The bent end of the bobby pin can then be used to pry the lock's locking mechanism apart, releasing the pins and unlocking the door.

The most common lock that is difficult to pick is a cylinder lock. A bobby pin is the most basic lock pick and can be used to open door locks that use tumbler mechanisms. When used properly, a bobby pin will be able to open a door without damaging the lock. The key to successfully use a bobby pin is to find a thin, flexible pin.